434 results found
-
IP subnet allocation
At the moment the system selects the available IPs 'randomly' from the available subnets.
It's needed to implement an option to switch from a 'random' selection of IPs to selecting "most free", and "round-robin" as well.
Randomness is causing shattering in all subnets and issues with provisioning.
2 votes -
Detailed error messages for API server creation failures
When attempting to create servers, it fails due to a variety of factors, including insufficient available IP addresses, locked nodes, storage constraints, and other resource limitations. The current error messages compel to manually investigate each potential issue, leading to wasted time and resources.
To enhance the efficiency of this, it would be better to have an option for more detailed and specific error messages. By clearly identifying the root cause of the failure—be it an IP shortage, a locked node, or inadequate storage—we can significantly reduce troubleshooting time and streamline our operations.
Implementing this change would involve minimal code modifications…
2 votes -
Allow the Postpaid billing to compute the hourly charges solely based on the online hours of the VMs.
It would be better if SolusVM add a feature on WHMCS Postpaid module to enable the Postpaid billing to compute the hourly charges solely based on the online hours of the VMs.
2 votes -
I mean no offense but if a demo of a companies primary product doesn't work....
A working demo of SolusVM would instill a little confidence. I mean no offense but if a demo of a companies primary product doesn't work, nor does it send an email like it says when the demo is setting up.... After a minute an "Oops" Would be a benefit to do videos that go beyond just the install. A setup video would help too.
1 vote -
Implement a feature request for checksum functionality on QCOW2 OS images, similar to what is currently available for ISO images - SolusVM 2
For enhanced security, it would be beneficial to include a checksum functionality option for QCOW2 OS images during the addition process, akin to the feature that is currently offered for ISO images in SolusVM 2.
2 votes -
Mikrotik CHR
Add Mikrotik OS to supported OSes for VPSes in SolusVM 2
2 votes -
Custom Fields to View Information SolusVM Admin via WHMCS
So i have an idea about adding new Custom Fields on WHMCS.
I want to view Hypervisor ID, Mac Address and other information that i need2 votes -
Disk downgrade for easy scaling
An option to downgrade the VM Disks alongside RAM and CPU for easy scaling management without messing up with the partition sectors and data.
4 votes -
CPU Topology in V2
Please implement CPU Topology feature in V2
4 votes -
Enhancements in the Activity logs
Add more filter options in SolusVM 2 Activity logs. It would be helpful to identify which administrator user added the IP blocks, as well as who removed the IP blocks and the specific IPs.
1 vote -
Feature to enable/disable the bandwidth calculation per Computer Resource basis- SolusVM 2.
It would be awesome if SolusVM 2 had an option to turn Bandwidth/Traffic Calculation on or off for each Computer Resource. This could really come in handy when we want to lift bandwidth limits for a certain location or resource, for instance.
1 vote -
Ability to select an option "None" on VLAN mode and Trunks on VLAN settings
Make the option available to select "None" in VLAN mode and "Trunks" in VLAN settings.
1 vote -
UEFI persistance on VMs after Resize (CPU, RAM)
Booting in UEFI in a VM - Currently, if the VM is resized (CPU, RAM), the correct manual edits for UEFI boot are reverted to the global ones from the CR(bios) and again, the manual changes need to be done on the same VM. A persistent option will be very helpful, especially in cases were from 100 VMs only 10 for example, need to be different
1 vote -
Disable Backup Deletion upon VM delete and Enable Recovery
Stop deletion, set purge.
VM deletion also deletes backups. This should purge after XX days not immediately as their could be a mistake. We should be able to set purge days per backup node.
Backup Recovery
Recovering a full backup to a new CR.
- Select the backup from a list of Backups (even deleted VMs) pending purge
- Select the NEW CR
- Select the NEW hostnameThe backup server will send full backup to newly created VM on selected CR.
- I'm sure there is underlying issues here but this would be amazing *
9 votes -
Billing & Support Tickets integration in solus UI using WHMcs Api
Billing & Support Tickets in solusvm client side UI.
Let users see their balance and invoices and pay them from solusvm UI instead of going to whmcs.
Let them open and reply to tickets from solusvm UI as well.
This can be done by utilizing WHMCS api, so instead of integrating solusvm into whmcs you can integrate whmcs into solusvm.
As things are now there is no real reason in using solusvm with whmcs as users will simple get a simplified UI made for whmcs addon and wont take advantage of the modern looking vultr like UI of solusvm.
And…3 votes -
Add Configurable Option To Select Storage Type Like SATA Or SSD
When User Place Order He/She Should Have Option To Select He/She Want VPS Created In SATA Drive or In SSD Drive.
Like We Have One Server With Both SATA And SSD Drive Option.
5 votes -
Firewall for virtual servers
A firewall system should be developed for virtual servers or virtual server groups. We have to block and allow certain ip and ports.
29 votes -
add ability to change the default name for default project in SolusVM 2
add ability to change the default name for default project in SolusVM 2
3 votes -
Configurable option to choose IP ranges.
It would be better to have an configurable option to choose the different IP blocks/ranges from WHMCS.
For example, few DC's offer DDOS protected IP ranges, So it would be good to have an option for WHMCS end user to select the DDOS Protected IP range and normal IP range for their VM.
14 votes -
Use Percentage bar to display the Physical resource usage in Computer Resources
It would be great to have the Percentage bar to display the Physical resource usage in Computer Resources in SolusVM 2, it should make the statistics easu to understand at first glance.
6 votes
- Don't see your idea?